| After-sales Service: | Remote Service Support |
|---|---|
| Warranty: | 1.5 Years |
| Certification: | CE, ISO9001 |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier LDP electric single-girder crane is a small-size low headroom crane. The electric hoist is at one side of the girder, which increases the workspace.
It is applicable to the places where the workshop's headroom is low.
The crane is composed of a box-shaped girder weld by steel plates, an end girder, crab frame, and a fixed electric block. The crab is partially hung and runs at one side of the g rider. The electric hoist is raised to the upside of the girder from under the girder, which effectively increases the lifting altitude.
The crab is braked by a conical motor and driven by exposed gear.
The girder, of box-shaped structure and bias rails, has horizontal wheels at the upper and the lower, so that it is safe and reliable and can avoid rail gnawing.
The trolley adopts a separate drive, conical motor brake and exposed gear drive. The traveling motor can be a soft start motor and variable-frequency adjustable-speed motor according to user requirements. The crane can start steadily and runs safely and reliably.
It has three operation modes: ground handle, wireless remote control and cab. The cab has two types, open cab and closed cab. The span of it is 7.5-22 5m(subject to non-standard design according to user s requirements). The classification group is A3 and the operating ambient temperature is-25ºC~40ºC.
Overload protection in the event of overload, the hoist unit switches off and only the lowering motion is possible
Long and cross travel limited by means of preliminary and final limit switches or Wireless anti-collision device
Anti-falling protection for the Three-in-One electric motor of trolley and crane prevents from accidental falling
All movements can be switched off by actuating the emergency-off switch at the control station via a main contact
High quality long time bearing polyurethane materials buffer fixed at the end of trolley travelling and crane travelling to prevent over traveling
Safety hook latch used for avoiding the lifted material out off from the hook
Audible and visual alarm device to inform the person stay near by the travelling crane.
Rain Cover for lifting mechanism of outdoor cranes, electric cabinet and driving mechanism
Protective earth conductor is fitted as standard
Voltage lower protection system
Current overload protection system
| LDP single girder overhead crane | |||||||
| Lifting capacity | 1 ton | 2 ton | 3 ton | 5 ton | 10 ton | 16 ton | 20 ton |
| Span | 7m-31.5m | ||||||
| Lifting height | 6/9/12/18/24/30m | ||||||
| Lifting motor | ZD122-4/1.5KW | ZD131-4/3.0KW | ZD132-4/4.5KW | ZD141-4/7.5KW | ZD151-4/13KW | ZD151-4/13KW | ZD152-4/18.5KW |
| Cross motor | ZDY111-4/0.2KW | ZDY111-4/0.4KW | ZDY112-4/0.4KW | ZDY121-4/0.8KW | ZDY121-4/0.8x2KW | ZDY121-4/0.8x2kw |
ZDY121-4 /0.8x4kw |
| Lifting speed |
0.8/8 m/min |
0.8/8 m/min |
0.8/8 m/min |
0.8/8 m/min |
0.7/7 m/min |
0.35/3.5 m/min |
0.4/4 m/min |
| Cross speed |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
| Traveling speed |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
| Power source | 380V 50Hz,3Phase or customized | ||||||
| Working class | A3 | ||||||
1). What's the information should I provide when inquiry?
More details or drawings, better.
A: Lift capacity B: span C: lift height D: power sourceor other specials you give us will be more appreciated.
2). How many operating methods for my selection?
Standard operating methods:
A: pendent controller with push buttons .B: remote control with push buttons C: cabin(space capsule seat) control with joystick. Choose any type as you like.
3). Can this type work in hazardous environment?
Sure! We can customize for you, acid proof or explosion proof, no problem for that.
4). Can you provide the serious lifting tools?
Sure, we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!
5). How can we install the crane?
Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.
6). Safety device Overload limiter, Limit Switch (lifting and traveling), Interlock protection device.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}