| Customization: | Available |
|---|---|
| After-sales Service: | Remote Service Support |
| Warranty: | 1.5 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LDA Sinlge Girder Overhead Crane is widely used in plants warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive or corrosives environment.
LDA Sinlge Girder Overhead Crane has two operational methods, ground or operational room which has open model and closed model and can be installed on left or right side according to the practical situation. And the direction of entering the gate has two forms, sideway and ends in order to satisfy the users' Choice users' different conditions.
1. The small wheel pressure and small volume can reduce the investment in the preliminary works such as the factory building.
2. Travelling mechanisms of crane and trolley adopt Europe three-in-one drive form,the harden gear face reducer has good performances in compact structure,low noise,no oil leakage and long service life.
3. With compact structure,low clearance,small dimension and large application scope,it can improve production efficiency.
4. Modular design has short design period and high generalization,which can improve the utilization of components.
|
Capacity |
t |
3 |
5 |
10 |
16 |
20 |
||
|
Operational method |
|
Pendent line with press button /cabin/remote control |
||||||
|
Speed |
Hoisting |
m/min |
8. 8/0.8 |
7. 7/0.7 |
3.5, 3.5/0.35 |
6. 6/0.6 |
||
|
Travelling of crab |
20 |
|||||||
|
Travelling of crane |
Surface |
20(30) |
20 |
|||||
|
Cabin |
20(30) |
20 |
||||||
|
Electric hoist |
Type |
CD1-3 MD1-3 |
CD1-5 MD1-5 |
CD1-10 MD1-10 |
CD1-16 MD1-16 |
|
||
|
Lifting height |
m |
6,9,12 |
6,9,12,18 |
9,12 |
9,12 |
9,12 |
||
|
Working class |
|
A3~A5 |
||||||
|
Power supply |
|
3-phrase 50HZ 380V |
||||||
| Configuration details of the EOT Crane: | ||
| Steel plate | Anyang/ Handan Q235 steel | |
| Hoist lifting motor | Large starting torque conical rotor Squirrel cage motor with disc brake | |
| Trolley traveling motor | Soft starting Squirrel cage with disc brake | |
| Crane traveling motor | Soft starting Squirrel cage with disc brake | |
| Hoist lifting reducer | 3-level helical gear type, gear and axles are of alloy steel or quailty carbon steel,reducer cover is of cast-iron | |
| Trolley traveling reducer | Involute gear reducer LD type | |
| Crane traveling reducer | Involute gear reducer LD type | |
| Wheel |
50# steel forged wheel, Annealing to stress relief, mid-frequency quenching for tread and flange surface,low tempering After heat treated,Tread and flange surface hardness reach HB300~380 |
|
| Bearing | Luoyang | |
| Brake | Built in brake | |
| Wire rope | High strength wire rope 6x37+FC1770 | |
| Hook | Forged 20Mn high strength material forged hook | |
| Trolley power supply | Festoon cable | |
| Control mode | Pendent line control | |
| Control panel | YES | |
| Cable |
Crane industry special cable YC or YVFB type, bear temperature up to 60'C |
|
| Buffer | High quality polyurethane buffer | |
| Painting |
Manual brush painting,One alkyd iron red primer painting, two alkyd orange enamel finish painting |
|
| Safe features of the EOT Crane: | ||
| Weight overload protection device | √ | |
| Emergency stop system | √ | |
| Over current Protection,Short-circuit Protection | √ | |
| Phase sequence protection, Zero position protection,No-Voltage protection | √ | |
| Mechanical interlock protection of controller | √ | |
| Limit switch for crane long traveling | √ | |
| Stopper and Limit switch for trolley cross traveling | √ | |
| Lifting up and lower down limit switch | √ | |
| High quality polyurethane buffer for crane long traveling protection | √ | |
We have passed CE, GOST, SGS, and OHSAS & ISO9001:2000 international quality control, ISO14001:1996 environment and ISO9001:2001 health and safety certifications.
){kind=link}