| Customization: | Available |
|---|---|
| After-sales Service: | Online Service |
| Warranty: | 18 Months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Monorail Travelling double lifting speed Metallurgical wirerope electric hoist
The metallurgical electric hoist can be installed on the I-beam track to lift heavy objects, and it can reciprocate in a straight line and a curve along the track to ensure sufficient safety. Molten metal can be lifted, but it is forbidden to use it in a low temperature below -10°C or an environment above 50°C. It is suitable for working in an environment without fire, explosion hazard and corrosive medium.
The metallurgical electric hoist drum is made of cast steel or seamless steel pipe. Power is transmitted by splines, and the drum shell is welded by steel plate. The drum device is the central part of the hoist. The upper part is connected with the trolley running mechanism, and the lower part is connected with the hook device through the wire rope. The upper part of the outer cover.
1. The working level of this electric hoist is M6, and the working environment temperature is not higher than 60ºC.
2. The lifting mechanism is equipped with two supporting brakes and one safety brake. The first stage is the magnetic pull brake of the cone rotor motor, that is, the working brake. The second stage is the friction dry head brake installed at the input of the reducer to prevent the failure of the first stage brake and continue to make the load rise and fall normally. move. The safety brake is a safety brake emergency braking device installed on the reel assembly to prevent the mechanism from failing and the transmission device is damaged in an emergency state.
3. Secondary limit device for upper limit position. The first time is the conventional electric hoist up and down travel limiter limit, and the second time is the heavy sag limit.
4. Thermal radiation protection of the main engine, the whole machine is equipped with a heat insulation board under the shell of the electric hoist drum, and two metal sheets are used to sandwich high-temperature asbestos materials to isolate the high-temperature radiation of the molten metal.
5. The insulation grade of the hoisting motor and the running motor is H-class, and the hoisting motor winding is equipped with an overheating protection device.
6. The steel wire rope adopts 6×37S+IWR-GB8918-2006 high-strength high-temperature resistant steel wire rope for important purposes.
7. The electrical control device is equipped with zero-voltage protection, loss-of-voltage protection, and over-current protection with phase-out protection. The control equipment cable adopts ZR+-YCP combustible heavy-duty rubber cable.
8. The control method adopts remote control or centralized control
| Lifting height | m | 6/9/12/18/24/30 | |||||
| Lifting speed | M/min | 8 | 8 | 8 | 8 | 7 | |
| Running speed | M/min | 20 | 20 | 20 | 20 | 20 | |
| Wire rope |
Rope diameter | mm | 7.4 | 11 | 13 | 15.5 | 15.5 |
| Structure type | 18*7+IWS | 18*7+IWS | 18*7+IWS | 18*7+IWS | 18*7+IWS | ||
|
16-28b | 20a-32c | 20a-32c | 25a-45c | 32b-63c | ||
| M6 | M6 | M6 | M6 | M6 | |||
| Working level | Type | YZD 22-4 | YZD 31-4 | YZD 32-4 | YZD 41-4 | YZD 51-4 | |
| rise Rise Electricity move machine |
capacity | kw | 1.5 | 3 | 4.5 | 7.5 | 13 |
| Rotating speed | Rpm | 1380 | 1380 | 1380 | 1380 | 1380 | |
| Phase Voltage | 3ph 380v 50hz | ||||||
| Current | Current | 4.3 | 7.6 | 11 | 18 | 30 | |
| frequency | Week/second | 50 | 50 | 50 | 50 | 50 | |
| Working level | type | YZD 12-4 | YZD 12-4 | YZD 12-4 | YZD21-4 | YZD21-4 | |
| transport Row Electricity move machine |
capacity | kw | 0.4 | 0.4 | 0.4 | 0.8 | 0.8 |
| Rotating speed | Rpm | 1380 | 1380 | 1380 | 1380 | 1380 | |
| Phase Voltage | 3ph 380v 50hz | ||||||
| Current | Current | 1.25 | 1.25 | 1.25 | 2.4 | 2.4 | |
| frequency | Week/second | 50 | 50 | 50 | 50 | 50 | |
Q: What's the information should I provide when inquiry?
A: More details or drawings, better.
Lifting capacity ?
Lifting height ?
Power source or other specials you give us will be more appreciated.
Q: What makes you different from other manufacturers ?
A: We believe our service department has the experience and knowledge to safely service your overhead cranes, gantry cranes, port crane and hoists. We have trained service technicians who will be able to get your material handling equipment up and running, and have been providing our customer's an effective service solution.
Q: Can this type work in hazardous environment?
A: Sure! We can customize for you, Acid Proof or Explosion Proof, no problem for that.
Q: Can you provide the serious lifting tools?
A: Sure, we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!
Q: How can we install the crane?
A: Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.
Q: The space of my workshop is limited, is there a crane or hoist that will fit me?
A: Thanks for your question. For low headroom workshop, we have the Special products. The detail dimension please consult our professional engineer
I WANT TO GET PRICE>>
){kind=link}