| Customization: | Available |
|---|---|
| After-sales Service: | Remote Service Support |
| Warranty: | 1.5 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Metallurgical single girder bridge crane to lift molten metal
1. LDY metallurgical single beam overhead crane is mainly used for metallurgical and foundry places where molten metal is lifted. Its lifting mechanism is metallurgical electric hoist, and its lifting capacity is no more than 10t.
2. The bottom of the main beam of the crane adopts special heat insulation treatment; the working environment temperature is -10ºC~60ºC, and the relative humidity does not exceed 50% at a temperature of 40ºC. Other places where molten non-metallic materials and hot solid metals are lifted can also be used as referenc
1. The power of crane is three-phase AC;rated frequency is 50HZ;rated voltage is 380V;
2. The temperature of working environment is-10~+60ºC;
3. The relative humidity is no more than 50% when the temperature is+40ºC;
4. If the requirements are more than above-mentioned,it shall carry out the requirements in the purchase contract as the user asks.
1,Strong box type, one whole shape main beam welded by robot machine, very strong and beautiful.
2, Sand blast for the whole crane steel structure, to make sure the paint is very strong.
3, Six action direction movement, to get enough working area.
4, Anti high temperature
5, Full safety system as follows:
Weight overload protection
Emergency stop system
Over current protection
Short-circuit protection
Phase sequence protection
Zero position protection,Voltage loss protection
Limit switch and stopper for crane long traveling and cross traveling
Overhigh lift and overlow lift limit switch
| Lifting weight(T) | 1 | 2 | 3 | 5 | 10 | |
| Span(m) | 3~16 | |||||
| Max Lifting height(m) | 3,6,9,12,18 | |||||
| Working class | A6 | |||||
| Main Hoisting Speed(m/min) | 8,8/0.8;7,7/0.7 | |||||
| Trolley Cross Traveling Speed(m/min) | 20,2~20(frequency inverter) | |||||
| Crane Long Traveling Speed(m/min) | 30,3~30(frequency inverter) | |||||
| Motor Type | Squirrel cage motor | |||||
| Motor (Kw) | Main Hoisting | 1.5 | 3 | 4.5 | 7.5 | 13 |
| Trolley Cross Traveling | 1*0.4,1*0.8,2*0.8 | |||||
| Crane Long Traveling | 2*0.4,2*0.8,2*1.5 | |||||
| Control mode | Pendent line control,Remote control | |||||
| Recommended Rail model | I20a~45c,I40b~63c | |||||
| Power source | 3Ph A.C 50Hz 380V | |||||
Q1: What's the information should I provide when inquiry?
){kind=link}